• Connect the Spray Nozzle to the Suction Hose.
• Turn on the main switch and pull the valve trigger
to start the water flow.
• Use water spray to wash or wet surfaces.
• Release the valve trigger to stop the water flow.
If necessary, water may be vacuumed.
WET CLEANING
OF UPHOLSTERY
SPRAYING
WET CLEANING OF UPHOLSTERY / SPRAYING
• Connect the Upholstery Nozzle to the Suction
Hose.
• Turn on the main switch and pull the valve
trigger to start the water flow.
• Wash upholstery by moving the nozzle back
and forth with the Upholstery Nozzle held
at an angle allowing clearance of front edge
from the upholstery surface. Do not soak the
upholstery!
• Release the valve trigger and dry the cleaned
upholstery by moving the nozzle backward
with the Upholstery Nozzle held at an angle
allowing direct contact of front edge with the
upholstery surface.
• Use caution during wet cleaning not to exceed
the maximum level mark in the Water Pan.
48 / 49
To Next Page
Loading...