To Next Page
V
Vanessa MclaughlinSep 12, 2025
Why is the steering pulling to one side on my HYOSUNG Offroad Vehicle?
- HhwrightSep 12, 2025
If the steering on your HYOSUNG Offroad Vehicle pulls to one side, adjust the tire pressure.
Why is the steering pulling to one side on my HYOSUNG Offroad Vehicle?
If the steering on your HYOSUNG Offroad Vehicle pulls to one side, adjust the tire pressure.
What to do if spark plug electrodes overheat on HYOSUNG WOW 50?
If the spark plug electrodes overheat or burn on your HYOSUNG Offroad Vehicle, replace them with a hot type plug.
General| Brand | HYOSUNG |
|---|---|
| Model | WOW 50 |
| Category | Offroad Vehicle |
| Language | English |
Guide on navigating and finding information in the manual.
Explanation of symbols used in the manual for servicing.
Information labels on the vehicle.
Safety precautions for servicing the vehicle.
Location of frame and engine serial numbers.
Recommended fuel and oil types.
Diagrams showing vehicle dimensions and layout.
Technical specifications of the vehicle.
Recommended intervals for periodic service work.
Key points requiring lubrication for smooth operation.
Procedure for cleaning the air cleaner element.
Procedure for tightening cylinder head nuts.
Procedure for removing carbon deposits.
Inspection, cleaning, and replacement of spark plug.
Idle speed and throttle cable adjustment.
Inspection of fuel line for leaks.
Procedure for changing transmission oil.
Front and rear brake adjustment.
Inspection, lubrication, and replacement of drive chain.
Inspection of tire pressure and tread condition.
Procedure for adjusting toe-in for steering.
Checking chassis bolts and nuts for tightness.
Steps for removing and reinstalling the engine.
Procedures for disassembling engine components.
Inspection and servicing of engine bearings.
Inspection for damage and leakage of oil seals.
Inspection of crankshaft runout and conrod big end.
Checks for clutch engagement and operation.
Decarboning and checking cylinder head gasket surface.
Measuring cylinder bore wear and reworking.
Measuring piston to cylinder clearance.
Removal, disassembly, inspection, and reassembly.
Removal, inspection, and remounting of the fuel tank.
Air bleeding and checking the oil pump capacity.
Checking ignition coil and charging output.
Measuring resistance and checking charging output.
Resistance measurement and replacement.
Overview of starter system components.
Inspection of carbon brushes and commutator.
Checking coil resistance.
Inspection for heating.
Checking switch continuity.
Battery treatment and maintenance precautions.
Exploded view of front wheel and brake components.
Removal, disassembly, and tightening torque.
Procedure for adjusting front wheel toe-in.
Removal, inspection, and remounting of the rear wheel.
Brake pad replacement and caliper disassembly.
Removal, inspection, and reassembly.
Common problems, causes, and remedies for engine and electrical.
List of special tools with part numbers and descriptions.
Torque specifications for engine and chassis components.
Technical data and limits for engine and chassis parts.
Diagrams showing wire and cable routing.
Electrical wiring diagram of the vehicle.
