EasyManua.ls Logo

Hyperion EOS0606i-B - User Manual

Hyperion EOS0606i-B
8 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HYPERION EOS0606i-B USER’S MANUAL
Visit http://media.hyperion.hk/dn/eos for the newest manuals and news
EOS 0606i Special Features (rev “B”)
*Powerful, yet compact and portable with wide support for battery types
*Integrated Hyperion LBA Balancer for LiPo (3.7v) and LiFe (3.3v) based cells
*Balance Multi-Adapter for 2S to 6S packs included (Hyperion Type)
*Charge, Discharge, and STORAGE Modes (and Cycling for NiMh and NiCd)
*Clear Yellow Backlit LCD Screen, Warnings for common setup errors
*Packaged in a rugged aluminum case - Long Input leads
*Hyperion Balance Multi-Connector Included. Option multi-connectors for
most common brands are also available (see details end of document)
*Output Harness with 4mm Gold Plugs included
Specifications
Input voltage range 11.0-15.0V DC
1-14 NiCd – Nickel-Cadmium cells
1-14 NiMH – Nickel-Metal Hydride cells
1-6 LiPo – Lithium Polymer cells, 100~20,000mAh (3.7V/cell type only)
1-6 LiFe – Lithium Iron (3.3V/cell types, inc. A123 brand cells / LiFePO4 cells)
Appropriate battery types and
range of series-connected cells
1-6 Lead-Acid cells (2V per cell nominal)
Charge current 0.1A ~ 6.0A MAX, by 100mA steps (50W limit)
Discharge current 0.1A ~ 1.0A MAX, by 10mA steps (5W limit)
Trickle charge current (NiCd, NiMH) 0 ~ 200mA
“Delta V” peak detection for NiCd/NiMH
Charge termination
“CV/CC” for Lithium and Lead-Acid Batteries
Cycling Modes (NiCd, NiMH) Charge>Discharge or Discharge>Charge
Display type 2-line, 16 character blue backlit LCD
Safety precautions
• KEEP CHARGER and BATTERIES AWAY FROM CHILDREN AND PETS AT ALL TIMES!
• This charger is ONLY for NiCd/NiMH, Lithium (3.7V/cell), A123 (3.3V/cell), and Lead-Acid (2.0V/cell)
type cells. DO NOT connect others, such as 3.6V/cell Lithium-Ion, or non-rechargeable batteries!
• Always place the charger on a firm, level, and fireproof surface for charging
• Do not place the battery or charger on or near flammable materials while in use:
Keep away from carpets, cluttered workbenches, etc
• Do not exceed cell manufacturer’s suggested max charge rates
• Do not use automotive type battery chargers to power the charger
• Do not leave the charger unattended while charging
• Do not allow water, moisture or foreign objects into the charger
• Do not open the charger, nor attempt any repair as it is dangerous and will void your warranty
• Do not obstruct the air intake or outlet holes on the charger
• ALWAYS follow correct connection sequence, as given below
• CAREFULLY FOLLOW THE BATTERY PACK MAKER’S RECOMMENDATIONS AND SAFETY ADVICE!
HIGH RISK CHARGING ADVISORY
Avoid charging batteries indoors. If you must charge indoors – or any place injury to persons or damage could result in the event of fire
– then be sure to:
* Keep battery well away from flammables (2 meters or more)
* Contain battery in a heavy fireproof container (such as a brick box)
* Always monitor the charge
HYPERION ACCEPTS NO RESPONSIBILITY FOR DAMAGE OR INJURY FOR INDOOR or other HIGH RISK CHARGING ACTIVITY
Initial Setup
The EOS 0606i requires 4mm Bullet Connectors (aka Banana Plugs) on 12awg wire leads for output harness between charger
and battery main wires. Harness wire leads should never exceed 20cm in length. Pre-assembled output harnesses are
available under Hyperion Part #HP-EOSOUTCORD, and one harness is included with each charger. Solder your chosen
battery-side connector to the bare wire ends of the harness, taking great care to observe proper polarity.

Table of Contents

Questions and Answers

  • S
    Sharon ScottAug 16, 2025
    What to do if Hyperion EOS0606i-B Battery Charger shows 'OUTPUT BATT REVERSE POLARITY'?
    • R
      Richard ThomasAug 16, 2025
      If you see 'OUTPUT BATT REVERSE POLARITY' on your Hyperion Battery Charger, it means the battery is connected with reversed polarity. Reconnect the battery with the correct polarity.
  • H
    Herbert MeadowsAug 22, 2025
    What to do if Hyperion EOS0606i-B says 'NO BATTERY'?
    • L
      Lauren MartinezAug 22, 2025
      If your Hyperion Battery Charger displays 'NO BATTERY', it means the battery is not being detected. Ensure that the battery is properly connected to the charger.
  • V
    Veronica JohnsonAug 25, 2025
    Why does my Hyperion EOS0606i-B Battery Charger display 'CHECK BATT OVER VOLTAGE'?
    • C
      clarkthomasAug 26, 2025
      The 'CHECK BATT OVER VOLTAGE' error on your Hyperion Battery Charger means the battery voltage is too high for the current charger settings. Lower the battery voltage to match the charger settings.
  • B
    bryan86Aug 28, 2025
    What does 'CHECK BATT OPEN CIRCUIT' mean on Hyperion Battery Charger?
    • M
      Michelle EdwardsAug 28, 2025
      If your Hyperion Battery Charger shows 'CHECK BATT OPEN CIRCUIT', it indicates that the battery was disconnected during charging. Reconnect the battery properly to resolve this issue.
  • D
    Dennis LopezAug 30, 2025
    What does 'CHECK BATT LOW VOLTAGE' mean on Hyperion EOS0606i-B?
    • H
      Hannah WilliamsAug 31, 2025
      The 'CHECK BATT LOW VOLTAGE' message on your Hyperion Battery Charger means the battery voltage is too low for the charger settings. Increase the battery voltage to match the charger settings.
  • M
    Miguel BartlettSep 3, 2025
    What to do if Hyperion Battery Charger shows 'OUTPUT CIRCUIT PROBLEM'?
    • J
      janice35Sep 3, 2025
      If your Hyperion Battery Charger displays 'OUTPUT CIRCUIT PROBLEM', it indicates a general circuit error. Inspect the condition of the battery.
  • T
    Tanner SmithSep 6, 2025
    Why does Hyperion Battery Charger say 'DON’T CHARGE Lixx WITH THIS MODE'?
    • S
      sherylmillerSep 6, 2025
      The message 'DON’T CHARGE Lixx WITH THIS MODE' on your Hyperion Battery Charger indicates that you're attempting to charge a Lithium pack in NiCd/NiMH/Pb mode while connected by the balancer. Select the correct charging mode for Lithium packs.
  • D
    Diane WatkinsSep 9, 2025
    How to fix 'BALANCER VOLTAGE TOO HIGH' on Hyperion Battery Charger?
    • V
      Veronica GonzalezSep 9, 2025
      The 'BALANCER VOLTAGE TOO HIGH' message on your Hyperion Battery Charger means that the voltage per cell is too high during balancing. Reduce the cell voltage during balancing.
  • L
    Linda WyattSep 10, 2025
    Why does my Hyperion Battery Charger show 'INPUT VOLTAGE ERROR'?
    • D
      Daniel StewartSep 12, 2025
      The 'INPUT VOLTAGE ERROR' on your Hyperion Battery Charger indicates that the input voltage is either below 11.0V or exceeds 15.0V. Check the input voltage to ensure it is within the accepted range.
  • D
    Dave LeeSep 12, 2025
    How to fix 'BALANCER VOLTAGE TOO LOW' on Hyperion EOS0606i-B?
    • P
      Patrick HallSep 12, 2025
      The 'BALANCER VOLTAGE TOO LOW' message on your Hyperion Battery Charger indicates that a cell's voltage has fallen too low during balancing. Increase the cell voltage during balancing.

Summary

Specifications

Safety Precautions

Operation Flow and Mode Selection

Connection Sequence

Follow the correct sequence for connecting input and output leads.

Changing Between Lithium Types

Select between LiPo and LiFePO4 battery types via a sub-menu.

Lithium Polymer;Ion Mode

Setting LiPo Battery Capacity

Adjust and set the LiPo battery capacity from 100mAh to 20000mAh.

Setting LiPo Battery Voltage

Select the total battery voltage for LiPo packs using INC/DEC buttons.

Setting LiPo Discharge Parameters

LiFe Mode (A123)

Setting LiFe Charge Current

Set LiFe charge current at a 1C rate based on specified capacity.

Setting LiFe Battery Voltage

Setting LiFe Discharge Current

NiCd;NiMH Mode Settings

Setting NiCd;NiMH Charge Current

Setting NiCd;NiMH Discharge Current

Setting NiCd;NiMH Discharge Cutoff Voltage

Pb Mode (Lead-Acid Battery)

Setting Lead-Acid Charge Current

Setting Lead-Acid Battery Voltage

Setting Lead-Acid Discharge Current

Store Mode for Lithium Battery Types

Troubleshooting

Error Messages

Warranty

Hyperion EOS0606i-B Specifications

General IconGeneral
Input Voltage11-18V DC
Charge Power50W
Discharge Power5W
Battery TypeLiPo, LiIo, LiFe, NiCd, NiMH, Pb
Pb Battery Voltage2 - 12V
Balance Port Current300mA
Output Current6A
Charge Current0.1-6A
Discharge Current0.1-1.0A
LiPo/LiIo/LiFe Cells1-6S
NiCd/NiMH Cells1-14 cells
Charging ModesBalance, Storage, Discharge
Display2 x 16 character LCD

Related product manuals