Need help?Do you have a question about the Hyperion EOS 5i DP AC/DC and is the answer not in the manual?
General| Charge Power | 50W |
|---|---|
| Discharge Power | 5W |
| LiPo/LiIo/LiFe Cells | 1 - 6 cells |
| Pb Battery Voltage | 2-24V |
| Balance Port | Yes |
| USB Port | No |
| Display | LCD |
| Input Voltage | 100-240V AC, 11-18V DC |
| Output Current (DC) | 5A |
| Charge Current | 0.1-5.0A |
| Discharge Current | 0.1-1.0A |
| Battery Types | LiPo, LiIo, LiFe, NiMH, NiCd, Pb |
Key features and capabilities of the EOS 5i DP AC/DC charger, including power options and display.
Technical details including input voltage, compatible battery types, charge/discharge currents, and display type.
Essential safety warnings and guidelines for operating the charger, emphasizing user safety and proper use.
Proper procedure for connecting the output harness and input power sources (AC/DC).
Explanation of button functions (BATT TYPE, ENTER, INC, DEC) for navigating menus and adjusting parameters.
Step-by-step guide demonstrating how to set up and start charging a NiMH battery.
Configuration options for NiCd batteries, including charge, discharge, cutoff voltage, and cycle settings.
Configuration options for NiMH batteries, including charge, discharge, cutoff voltage, and cycle settings.
Configuration options for 3.7V/cell Lithium batteries: capacity, voltage, and discharge parameters.
Configuration options for Lead-Acid batteries: charge current and total battery voltage.
Information shown upon completion of charge/discharge and how to access operational data.
Descriptions of various error messages and their potential causes during operation.
Details on connecting the LBA10 balance adapter via the DataPort for monitoring battery cells.
How to view individual cell voltages and pack status when using the LBA10 balance adapter.
To Next Page
