The Buttons:
1. “TYPE” Button = This button is used to select the Chemistry Type when checking voltages, Charging, or
Discharging. LiPo, LiFe, HvLi, or NiMH Battery Types are available.
2. “MODE / CHARGE” Button = This button is used to select the Mode of the battery. When selecting “V Total”
mode, this will show the Total voltage of the battery. When selecting the “Max-Min” mode, this will show the
maximum difference between the highest and lowest cell, it will also display those corresponding cells in the Cell count
area.
To enter the “Charge” or “Discharge” mode, make sure you have the batteries main XT60 connector, or Power supply
connected to the Sentry, and then the battery. Once you confirm the proper battery Type and Cell counts is selected,
press and hold down the “MODE / CHARGE” button for atleast three seconds. You will hear the Sentry beep, and then
either “Charge” or “DisCharge” will be displayed on the screen.
3. “CELL / RATE” Button = This button is used to view the individual cell voltages of a battery when checking
voltages. The corresponding cell number will be displayed i.e, “1S”, “2S”, “3S”…
Also, while in the “Charge” mode, the user may press the “CELL / RATE” Button to adjust the charging rate. The
options of 0.5amp, 1.5amp, and 2.0amp will be displayed when selected.
WARRANTY: HYPERION Chargers are guaranteed to be free from defects in materials and workmanship for a period of
one calendar year from date of purchase. Your selling dealer is your first point of contact for warranty issues. Return
postage costs are the responsibility of the user in all cases. You MUST submit a copy of original receipt with the
charger, and full description of the problem must also be included in the return package. Damage due to physical
shock (dropping on the floor, etc), connection errors due to unauthorized charging configurations, inappropriate power
supply [automotive battery charger, etc!], water, moisture, and humidity are specifically NOT covered by warranty. It
is well to carefully check your charger and consult your vendor before making a return, as problems in setup, cabling,
batteries, or power supply are much more common than defects in the
www.Hyperion-World.com Hyperion HK Ltd.
To Previous Page
Loading...
Need help?
General
