HyperX Cloud Alpha Wireless

Document No. 4P5D4AA.A01
HyperX Cloud Alpha Wireless
Page 14 of 16
Tone Notifications
In NGENUITY software, the headset voice prompt notifications can be disabled. When disabled, the
headset will emit tones to indicate the current headset status or behavior. See table below for details:
Headset status
Tone Notification
Power On
1 tone (high)
Power Off
2 tones (high, low)
Maximum volume reached
3 tones (high)
Minimum volume reached
3 tones (low)
Low battery (15%)
4 tones (mid, low, mid, low)
Microphone muted
2 tones (high, high)
Microphone active
1 tone (high)
Mic monitoring on/off
2 tones (mid, mid)