HyperX Cloud Buds User Manual

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 6 of 7
Controls
Power Button
Power On/Off
Hold for 2 seconds to turn on or off.
Bluetooth® Pairing
1. With the headset off, hold the power button for 5 seconds to enter pairing mode. The LED indicator
will flash red and blue and a voice prompt will play.
2. On your Bluetooth® enabled device, search and connect to “HyperX Cloud Buds.” Once connected,
the indicator LED will flash blue every 5 seconds and a voice prompt will play.
Volume Buttons
Press the + and – buttons to adjust the volume level up or down.
Multifunction Button
Status
1 Press
2 Presses
3 Presses
Long Press
Playing Media
Play/Pause
Skip Track
Previous Track
Activate Mobile
Assistant
Receiving Call
Answer Call
X
X
Reject Call
In Call
End Call
Swap Calls
X
X
Note: Button functionality may differ depending on connected device.

HyperX Cloud Buds Specifications

General

Type	In-ear
Frequency Response	20Hz–20kHz
Battery Life	Up to 10 hours
Weight	27.5g
Microphone	Yes
Driver	14mm
Charging Time	2 Hours
Bluetooth	Bluetooth 5.0