HyperX Cloud Core Wireless User Manual

Document No. 480HX-HHSC1C.A01
HyperX Cloud Core Wireless
Page 16 of 17
4. Launch “DTS Sound Unbound” app to enable and configure DTS Headphone:X.
DTS Headphone:X can be enabled as long as the headset USB adapter is plugged into the PC. It can
be enabled either in the DTS Sound Unbound app or through the Sound icon shortcut in the taskbar. To
enable DTS Headphone:X through the taskbar, follow the steps below:
• Right click Speaker icon > Select Spatial sound > Select DTS Headphone:X

HyperX Cloud Core Wireless Specifications

General

Driver Size	53mm
Battery Life	Up to 20 hours
Wireless Range	Up to 20 meters
T.H.D.	< 2%
Weight	283g
Microphone Sensitivity	-42dBV (1V/Pa at 1kHz)
Wireless Technology	2.4 GHz
Form Factor	Over-ear
Frequency Response	10Hz - 21kHz
Impedance	60 Ω
Microphone Type	Detachable, Noise-cancelling
Connection Type	Wireless
Microphone Element	Electret condenser
Microphone Polar Pattern	Noise-cancelling