HyperX Cloud II Wireless User Manual

Document No. 480HX-HHSC2X.A01
HyperX Cloud II Wireless
Page 13 of 13
Manually Pairing the Headset and USB Adapter
The headset and USB adapter are automatically paired together out of the box. But if manual pairing is
needed, follow the steps below to pair the headset and USB adapter.
1. While the headset is powered off, hold down the power button until the headset status LED
starts blinking red/green rapidly. The headset is now in pairing mode.
2. While the USB adapter is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to
hold down the button inside the pin hole until the USB adapter LED starts blinking rapidly. The
USB adapter is now in pairing mode.
3. Wait until both the headset LED and the USB adapter LED are solid.
The headset and USB adapter are now paired together.
Questions or Setup Issues?
Contact the HyperX support team at: hyperxgaming.com/support/

HyperX Cloud II Wireless Specifications

General

Headset type	Binaural
Product type	Headset
Product color	Black, Red
Wearing style	Head-band
Recommended usage	Gaming
Sound pressure level (max)	104 dB
Frequency band	2.4 GHz
Wireless range	20 m
Connectivity technology	Wireless
Impedance	60 Ω
Driver type	Dynamic
Driver unit	53 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	15 - 20000 Hz
Headphone sensitivity	-20 dB
Total Harmonic Distortion (THD)	1 %
Microphone type	Boom
Microphone frequency	50 - 6800 Hz
Microphone connectivity	3.5 mm
Microphone direction type	Bidirectional microphone
Frame material	Aluminum
USB cable length	0.5 m
Audio output channels	7.1 channels
Battery type	Built-in battery
Continuous audio playback time	30 h
Material	Leatherette, Memory foam
Cables included	USB Type-A to USB Type-C
Wireless receiver interface	USB Type-A

Weight and Dimensions

Weight	309 g