HyperX Cloud II Wireless User Manual


ENGLISH
Overview
A - Mic mute / mic monitoring button
B - USB Charge port
C - Microphone port
D - Status LED
E - Power button/ 7.1 Surround
Sound button
F - Volume wheel
Usage
1. Connect the wireless adapter to your device 2. Power on the headset
Setting up with PC
Right click speaker icon > Select Open Sound settings > Select Sound control panel
Playback Device
1. Set Default Device to “HyperX Cloud II Wireless”
2. Right click on “HyperX Cloud II Wireless” and click on Congure.
3. Select 7.1 Surround to congure your setup and click next.
Recording Device
Set Default Device to “HyperX Cloud II Wireless”
Setting up with PlayStation 4
1. Connect the USB adapter to your device 2. Power on the headset
Settings > Devices > Audio Devices
Input Device: USB Headset “HyperX Cloud II Wireless”
Output Device: USB Headset “HyperX Cloud II Wireless”
Output to headphones: All Audio
Status LED
*Battery level indication
Mic mute / mic monitoring button
LED On – Mic muted LED O – Mic active
Hold for 3 seconds to toggle mic monitoring on/o
Power / 7.1 Surround Sound button
Power on/o – Hold power button for 3 seconds
Press to toggle 7.1 Surround Sound on/o
Volume wheel
Scroll up and down to adjust volume level.
WARNING: Permanent hearing damage can occur if a headset is used at high volumes
for extended periods of time.
Charging
It is recommended to fully charge your headset before rst use.
Wired Charging
HyperX NGENUITY Software
Download software and latest rmware updates at:
hyperxgaming.com/ngenuity
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at:
hyperxgaming.com/support/headsets
STATUS LED
Flash green and red every 0.2s
Slow breathing green
90% – 100%: Solid green
15% – 90%: Blinking green
Pairing
Searching
Connected*
< 15%: Blinking red
STATUS LED CHARGE STATUS
Fully Charged
15 - 99%
Solid green
Breathing green
niveau inférieur < 15%Breathing red
G - Detachable microphone
H - Microphone mute LED
I - USB adapter
J - Wireless pairing pin hole
K - Wireless status LED
L - USB charge cable

HyperX Cloud II Wireless Specifications

General

Headset type	Binaural
Product type	Headset
Product color	Black, Red
Wearing style	Head-band
Recommended usage	Gaming
Sound pressure level (max)	104 dB
Frequency band	2.4 GHz
Wireless range	20 m
Connectivity technology	Wireless
Impedance	60 Ω
Driver type	Dynamic
Driver unit	53 mm
Magnet type	Neodymium
Ear coupling	Circumaural
Headphone frequency	15 - 20000 Hz
Headphone sensitivity	-20 dB
Total Harmonic Distortion (THD)	1 %
Microphone type	Boom
Microphone frequency	50 - 6800 Hz
Microphone connectivity	3.5 mm
Microphone direction type	Bidirectional microphone
Frame material	Aluminum
USB cable length	0.5 m
Audio output channels	7.1 channels
Battery type	Built-in battery
Continuous audio playback time	30 h
Material	Leatherette, Memory foam
Cables included	USB Type-A to USB Type-C
Wireless receiver interface	USB Type-A

Weight and Dimensions

Weight	309 g