HyperX CloudX Flight User Manual

Document No. 480HX-HSCFX.A01
HyperX CloudX Flight
®
Page 10 of 11
Manually Pairing Headset and Wireless Adapter
The headset and wireless adapter are already paired together for first time use. If manual pairing is
necessary, follow the steps below to pair the headset and wireless adapter together.
1. Make sure the headset is powered off.
2. Plug the USB wireless adapter into the Xbox One
®
system.
3. Use a small pin to press the small button on the back side of the USB wireless adapter for 3
seconds. The USB wireless adapter LED will be fast blinking.
4. With the headset turned off, press and hold the headset power button for 10 seconds to enter
pairing mode. The headset earcup LEDs will blink rapidly.
5. When the USB wireless adapter LED turns solid and the headset ear cup LEDs have returned
to their last used mode, the pairing process has been completed.

HyperX CloudX Flight Specifications

General

Foldable	Yes
Cable length	1 m
Headset type	Binaural
Product type	Headset
Product color	Black
Wearing style	Head-band
Volume control	Button
Backlight color	Green
Recommended usage	Gaming
Compatible products	Xbox One, Xbox Series X|S
Bluetooth	-
USB connector	Micro-USB
Frequency band	2.4 GHz
Wireless range	20 m
Connectivity technology	Wireless
Charging source	USB
Continuous audio playback time	30 h
Impedance	32 Ω
Driver type	Dynamic
Driver unit	50 mm
Magnet type	Neodymium
Ear coupling	Supraaural
Headphone frequency	20 - 20000 Hz
Headphone sensitivity	113 dB
Total Harmonic Distortion (THD)	2 %
Microphone type	Boom
Microphone frequency	100 - 10000 Hz
Number of microphones	1
Microphone sensitivity	51 dB
Microphone connectivity	3.5 mm
Microphone direction type	Bidirectional microphone

Weight and Dimensions

Weight	288 g