HYQUEST SOLUTIONS PTY LTD
Tipping Bucket Raingauge TB3 100-09 Issue 12: 29/7/2014
VII. ELECTRICAL
Dual reed switches are provided for several reasons:
Two isolated switches permit the control of two separate circuits; e.g. a
local counter and a telemetry circuit.
Parallel connection of both switches increases the current carrying
capacity of the contact system if required.
Parallel switch operation confers a degree of redundancy in locations
where data from the raingauge is critical to flood warning etc.
VIII. CALIBRATION
All gauges have been calibrated by Hyquest Solutions Pty Limited prior to despatch.
The following products and services are available from Hyquest Solutions Pty Ltd.:
Field Calibration Device, Model FCD, for routine field check calibrations,
supplied with operating instruction sheet.
Laboratory Calibration Unit, Model TB340, for calibration after servicing in
workshops, supplied with operating manual.
Recalibration Service at Hyquest Solutions’ factory.
Please contact either Hyquest Solutions Pty Ltd or our local distributor for further
information.
Voltage free closure reed switch
Switch ‘1’
Switch ‘2’
Mounting Holes
To Next Page
Loading...