Hyster D435-R2.0HD - User Manual

1 (12/2014)Revision:Part no.:
Technical information for Hyster service
centres
This manual is intended solely for the specialized technicians of
the Hyster service network.
4065749
D435.....
R1.4 R1.6N
R1.6 R1.6HD
R2.0 R2.0HD
R2.5

Summary

GENERAL SAFETY RULES

PERSONAL SAFETY

Rules for protecting personnel during operations.

SAFETY AT THE WORKPLACE

Guidelines for maintaining a safe work environment.

BELTS, ROPES AND SUSPENSION ELEMENTS: USER ADVICE

Using suspension elements under conditions of unbalanced load

Precautions for lifting unbalanced loads with suspension elements.

Tips for maintenance

Maintenance recommendations for belts, ropes, and suspension elements.

TORQUE SETTINGS FOR SCREWS, NUTS AND FITTINGS

CORRECT METHOD FOR APPLYING FEMALE FITTINGS

Female fittings without a gasket (metal;metal joint)

Female fittings with O-ring

INSTRUCTIONS FOR INSTALLING FLEXIBLE HOSES AND FITTINGS

Inspection of pipes and fittings

Pre-installation inspection

Installation

PRESENTATION

TRUCK PRESENTATION

TRUCK AND LOAD IDENTIFICATION DATA

TRUCK IDENTIFICATION DATA PLATE

RESIDUAL LOAD PLATE

GENERAL SPECIFICATIONS

Technical specifications and dimensions for the trucks.

Hyster D435-R2.0HD Specifications

General

Model	D435-R2.0HD
Power Source	Diesel
Tire Type	Pneumatic
Category	Forklifts
Load Center	500 mm (20 in)
Travel Speed	12 mph
Load Capacity	2000 kg (4400 lbs)
Engine Power	27.9 kW (37.4 hp)
Fuel Capacity	60 L (15.9 gal)