Hyster J2.2-3.5XN User Manual

USER INTERFACE
SERVICE TECHNICIAN
E4.0-5.5XN, E5.0XNS
(E80-120XN, E100XNS) [A099];
A1.3-1.5XNT (A25-30XNT) [D203];
J1.5-2.0XNT (J30-40XNT) [K160];
E2.2-3.5XN (E45-70XN) [A268];
E1.6-2.0XN (E30-40XN) [A269];
J2.2-3.5XN (J45-70XN) [A276];
J1.6-2.0XN (J30-40XN) [A935];
J4.0-5.0XN (J80-100XN) [A970]
PART NO. 1688879 2200 SRM 1336

Hyster J2.2-3.5XN Specifications

General

Model	J2.2-3.5XN
Lift Height	Up to 6500 mm
Category	Forklifts
Load Capacity	2200 - 3500 kg
Tire Type	Pneumatic/Cushion

Summary

SAFETY PRECAUTIONS MAINTENANCE AND REPAIR

General

Operating Screen

Operating Screen Introduction and Controls

Key Indicators Explained

Details icons for battery, direction, parking brake, hazard flashers, lights, steer angle, system time, and load weight.

Password Screen

Password Screen Introduction and Setup

Password Management

Explains adding, removing, and changing passwords via the Truck Setup Menu.

Activity Log Menu

Log Details and Access

Details viewing Operator Checklist, Password, and Impact Events logs, including removal.

Calibration Menu

Calibration Menu Introduction and Submenus

Calibration Procedures

Guides calibration for Load Weight, Tilt Stop, Valves, Steering, Axle, and Manual Hydraulics.

Display Menu

Display Menu Introduction and Submenus

Status Menu

Status Menu Introduction and Submenus

Truck Setup Menu

Truck Setup Introduction and Submenus

Introduces the menu and lists its extensive submenus for truck configuration.

Password and Motor Braking Setup

Covers password management and motor braking settings.

Battery and BDI Setup

Guides battery voltage/ampere configuration and BDI adjustment.

Acceleration, Hour Meters, and Impact Settings

Maintenance Reminders and Speed Limits

Hydraulic Function Adjustments

Diagnostics Menu

Diagnostics Menu Introduction and Restore Defaults

Fault Code Log and Details

Enables viewing recent fault codes and explains the details for each entry.

System Status and Sensor Readings

Covers speedometer, direction switch, motor/pump status, sensors, voltages, and steering positions.