To Next PageTo Next Page
Need help?Do you have a question about the Hyster J4.0-5.0XN and is the answer not in the manual?
General| Model | J4.0-5.0XN |
|---|---|
| Category | Forklifts |
| Load Capacity | 4000-5000 lbs |
| Power Source | Electric |
| Battery Voltage | 48V |
| Wheel Configuration | 4-wheel |
| Load Capacity (lbs) | 4000-5000 |
| Power Type | Electric |
| Tire Type | Pneumatic |
Explains how to activate and navigate the display panel using keys.
Illustrates the menu structure and navigation paths for technicians.
Details the icons associated with soft keys and their functions.
Lists and explains icons displayed on the main operating screen.
Details how to adjust and understand performance modes.
Explains icons that provide status and warning information.
Describes the BDI display and its relation to battery charge levels.
Explains fault and interlock notification screens.
Details the primary password screen and entry requirements.
Describes how to set up passwords for service technicians.
Explains the process for managing user passwords.
Details the submenu for viewing recorded impact events.
Procedure for calibrating the load weight measurement system.
Calibration procedure for the Return to Set Tilt feature.
Calibration for E-Hydraulic and manual valve thresholds.
Calibration to set the steering wheel's center point.
Calibration procedure for the steer axle position.
Allows technicians and supervisors to manage user passwords.
Details settings for regenerative braking and auto deceleration.
Configuration for battery voltage, capacity, and cell voltages.
Setting acceleration rates and performance modes.
Setting up and managing scheduled maintenance reminders.
Setting and adjusting the truck's traction speed limit.
Adjusting settings for impact detection and monitoring.
Resets all adjustable truck settings to factory defaults.
Viewing and clearing recent fault codes for various devices.
