Need help?Do you have a question about the Hyster J1.60XMT and is the answer not in the manual?
General| Load Capacity | 1600 kg |
|---|---|
| Overall Width | 1090 mm |
| Battery Voltage | 48 V |
| Power Type | Electric |
| Rated Capacity | 1600 kg |
| Drive | Electric |
| Mast Type | Triplex |
Essential safety guidelines for working in proximity to the mast, including securing procedures.
Procedure for removing the standard carriage from the mast assembly.
Steps to remove the hang-on sideshift carriage assembly.
Repair procedures for standard and hang-on sideshift carriages.
Instructions for reinstalling the standard carriage.
Steps to install the hang-on sideshift carriage.
Procedure for removing the integral sideshift carriage.
Cleaning and inspection steps for the integral sideshift carriage.
Repair procedures for the integral sideshift carriage.
Procedure for safely removing the mast assembly from the lift truck.
Steps to disassemble two-stage LFL and FFL masts.
Disconnecting FFL supply and removing main lift cylinders.
To Next Page
