Need help?Do you have a question about the Hyster J160 and is the answer not in the manual?
General| Model | J160 |
|---|---|
| Category | Forklifts |
| Mast Type | 2-Stage or 3-Stage |
| Turning Radius | Varies with configuration |
| Load Capacity | 16000 lbs |
| Tire Type | Pneumatic |
Essential safety practices for personnel working in proximity to the mast, covering hazard identification and mitigation.
Detailed steps to remove forks from trucks without or with older fork positioners.
Detailed steps to remove forks from newer trucks equipped with fork positioners.
Detailed steps to install forks on trucks without or with older fork positioners.
Detailed steps to install forks on newer trucks with fork positioners.
Guide for inspecting forks for wear, cracks, and alignment.
Technical specifications and methods for checking fork tip alignment.
Step-by-step guide to safely remove the hang-on sideshift carriage.
Repair procedures for common issues on standard and hang-on sideshift carriages.
Step-by-step guide to safely install the standard carriage assembly.
Step-by-step guide to safely install the hang-on sideshift carriage.
Procedure for removing the integral sideshift carriage assembly.
Procedures for cleaning and inspecting carriage parts for wear and damage.
To Next Page
