Hyster J1.6-2.0XN User Manual

USER INTERFACE
SERVICE TECHNICIAN
E4.0-5.5XN, E5.0XNS
(E80-120XN, E100XNS) [A099];
A1.3-1.5XNT (A25-30XNT) [D203];
J1.5-2.0XNT (J30-40XNT) [K160];
E2.2-3.5XN (E45-70XN) [A268];
E1.6-2.0XN (E30-40XN) [A269];
J2.2-3.5XN (J45-70XN) [A276];
J1.6-2.0XN (J30-40XN) [A935];
J4.0-5.0XN (J80-100XN) [A970]
PART NO. 1688879 2200 SRM 1336

Hyster J1.6-2.0XN Specifications

General

Model	J1.6-2.0XN
Power Source	Electric
Number of wheels	4
Load Center	500 mm
Category	Forklifts

Summary

Safety Precautions Maintenance and Repair

Operating Screen

Performance Mode Controls

How to adjust and understand truck performance modes (1-4).

Status and Warning Icons

Explains icons indicating truck status, warnings, and service needs.

Battery Discharge Indicator

Password Screen

Service Technician Password Setup

Steps for setting up initial and subsequent passwords.

Adding/Removing/Changing Passwords

Calibration Menu

Load Weight Calibration

Calibrating the load weight measurement system.

Return to Set Tilt Stop Point Calibration

Calibrating the tilt stop point for automatic return.

E-Hydraulic and Manual Valve Threshold Calibration

Calibrating hydraulic valve thresholds for functions.

Steering Wheel Knob Center Point Calibration

Calibrating the center point for steering wheel knob input.

Display Menu

Set Date and Time Format Menu

Status Menu

Truck Setup Menu

Add/Remove Password

Motor Braking

Configuring regenerative braking and auto deceleration settings.

Battery Setup

Adjusting battery voltage, capacity, and cell voltage settings.

Acceleration Rates

Setting acceleration limits for low and high speeds.

Diagnostics Menu

Fault Code Log

Viewing and clearing recorded fault codes for various system components.

Traction Motor 1 Status

Pump Status