How to fix HYT Two-Way Radio that cannot power on?
If your HYT Two-Way Radio won't power on, it might be due to a drained battery. Try recharging the battery or replacing it with a new one. Alternatively, the battery may not be correctly installed. Remove the battery and reattach it securely.
Why is the operating time of my HYT Two-Way Radio shorter than normal?
If your HYT Two-Way Radio's operating time is noticeably shorter, even after a full charge, the battery may be worn out, indicating it's time for a replacement. Also, ensure the battery is fully charged by removing it from the charger only after the charger LED turns green.
What to do if I cannot talk to or hear group members on my HYT TC-518 OBR?
If you cannot communicate with group members on your HYT Two-Way Radio, ensure you are on the same channel. Also, check if the Channel Lock feature is enabled, as this prevents channel changes. Confirm that all radios have matching channel and CTCSS/CDCSS settings. Finally, make sure you are within the communication range of your group.
Why is there no voice or low voice when transmitting on my HYT TC-518 OBR Two-Way Radio?
If you experience no voice or low voice while transmitting on your HYT Two-Way Radio, first, ensure the volume control knob is properly adjusted. If the issue persists, contact your retailer for RMA (Return Merchandise Authorization) and warranty information.
How to stop hearing non-group members on my HYT Two-Way Radio?
If you are hearing non-group members on your HYT Two-Way Radio, the CTCSS/CDCSS settings should be changed for all radios in your group using a programming cable and CPS software.
General| Brand | HYT |
|---|---|
| Model | TC-518 OBR |
| Category | Two-Way Radio |
| Language | English |
Explains manual icons, copyright details, and disclaimers for user reference.
Covers FCC requirements, license information, and safe RF exposure practices.
Lists and illustrates the standard accessories included in the radio package.
Identifies and describes the physical parts and programmable keys of the radio.
Explains the meaning of LED indications and alert tones for different radio statuses.
Describes indicators for VOX, Compandor, Scrambler, Channel Lock, and ports.
Provides instructions for first-time battery charging and general care.
Offers advice on prolonging battery life, handling storage, and charging procedures.
Details the steps for charging the battery and the meaning of charger LED indicators.
Step-by-step guide on how to attach and remove the radio's battery pack.
Instructions for attaching and removing the antenna, belt clip, and audio accessories.
Explains how to remove external audio accessories like earpieces.
Guides on how to turn the radio on/off and adjust the audio volume.
Covers selecting channels, transmitting, and receiving signals with coverage details.
Explains setting up CTCSS/CDCSS for group talk and preventing unwanted conversations.
Describes the Battery Save feature to reduce power consumption during standby.
Details the Time-out Timer (TOT) and Battery Strength Indicator functions.
Explains how to use Monitor and Squelch Off to listen to channel activity.
Describes momentary Squelch Off and Monitor modes, and basic scan setup.
Details how to use the Scan feature to monitor multiple channels.
Explains Priority Channel Scan, Scan On/Off, and Talk Back features.
Covers Busy Channel Lockout (BCL) and the Low Battery Alert notification.
Explains how to use VOX for hands-free transmission with accessories.
Provides detailed usage instructions and important notes for the VOX feature.
Describes the Compandor, Scrambler, and Channel Lock features for enhanced communication.
Details warranty exclusions and defines who is covered and how to obtain service.
To Next Page
