Hytera DMR - Basic Operations; Powering On;Off and Volume; Channel and Zone Selection; Keypad Lock;Unlock

Installation of Upgrade Program Firmware Upgrade Guide
10
2. Installation of Upgrade Program
Before the firmware upgrade, install the corresponding program in the following steps.
Step 1 Prepare the firmware upgrade package.
Prepare the upgrade package for the repeater to be upgraded, according to your exact needs.
Step 2 Decompress the upgrade package.
You can find the corresponding firmware upgrade guide and setup program.
Step 3 Double click the program (setup.exe) to start the installation.
Step 4 Refer to the interface prompts to finish the installation.
Then you can find a desktop shortcut for this upgrade software.