Hytera MT680 Tetra - User Message

Error! Use the Home tab to apply 标题
1,Part,Document Header,Part1,Document
Header1,Part2,Document
Header2,Part11,Document
Header11,Part12,Document
Header12,Part21,Document
Header21,Part111,Document
Header111,Part3,Document
Header3,Part13,Document Header13,Part22
Owner’s Manual
28
9.2 User Message
9.2.1
TMO
Editing a User Message
Press the Function/P1 key or OK key and navigate to “Message -> Create Msg -> User Msg”. Press OK
again to edit a user message.
Sending a User Message
After editing, press OK to confirm. Then select the target contact and decide whether to send it as a flash
message.
Note:
If the message is sent as a flash message, the receiving party can preview all the content in a
predefined time period without any operation. Once the time period expires, the home screen will get
restored, with the icon
displaying on the status bar.
Viewing the User Message
When the icon appears in the home screen, it indicates there is/are unread message(s). Do as
follows to view it:
z In the prompt screen for unread message(s), press the OK key to enter the Inbox, and press OK
again to read.
z In the home screen, press the Function/P1 key or OK key and navigate to “Message -> Inbox ->
Inbox”. Then you can view the unread message.
9.2.2 DMO
Editing a User Message
Press the Function/P1 key or OK key and navigate to “Message -> Create Msg -> User Msg”. Press OK
again to edit a user message.