Hytera PD402i - Attaching the Belt Clip; Attaching the Accessories; Charging the Battery

4
1
2
3
1
2
Before Use
Attaching the Belt Clip
Attaching the Accessories
Remove the screws Assemble the Belt Clip
Caution
Charging the Battery
Charging the Radio
Charging the Battery
LED Indication Current Status
The LED Indicator flashes red slowly
Standby (no load)
The LED Indicator glows red
Charging
The LED Indicator glows orange
90 %
90% charged
The LED Indicator glows green
100 %
Fully charged
The LED Indicator flashes red rapidly
Charging error
●
Make sure the radio is powered off before charging.
Read the Safety Information Booklet in advance to
get necessary safety information.
●
Charge a new battery for at least 5 hours before initial
use for best performance.