Hytera SM27W2 User Manual

9
Troubleshooting
Phenomena Analysis Solution
Automatic re-connection
fails.
The distance between
the product and the radio
is beyond the e󽗈ective
communication distance.
Keep the product and the radio within
the e󽗈ective communication distance.
Noise exists during a call.
When you press the PTT key,
the LED indicator does not
glow.
The product cannot be
turned on.
The battery power is running
out.
Charge the product.
During charging, the LED
indicator does not glow.
The battery power is running
out.
Charge the product for 10 minutes to
20 minutes. After charging, the LED
indicator will glow red.
The press on any one of keys
is invalid.
The product is frozen.
1. Long press the TK, Left, and Right
keys for two seconds to reset and
turn o󽗈 the product.
2. Turn on the product.
If the above solutions cannot 󽗉x your problem, or you may have some other queries, contact your local
dealer or Hytera for more technical support.

Hytera SM27W2 Specifications

General

Brand	Hytera
Model	SM27W2
Category	Microphone
Language	English