Owner’s Manual
Message
23
Note:
If the message is sent as a flash message, the receiving party can preview all the content in a
predefined time period without any operation. Once the time period expires, the home screen will get
restored, with the icon
displaying on the status bar.
Viewing the User Message
When the icon appears in the status bar, it indicates there is/are unread message(s). Do as follows
to view it:
z In the prompt screen for unread message(s), press the OK key to enter the Inbox, and press OK
again to read.
z In the home screen, press the Function/P1 key or OK key and navigate to “Message -> Inbox ->
Inbox”. Then you can view the unread message.
9.2.2 DMO
Editing a User Message
Press the Function/P1 key or OK key and navigate to “Message -> Create Msg -> User Msg”. Press OK
key again to edit a user message.
Sending a User Message
After editing, press OK to confirm. Then choose either an individual or a group as the target contact,
input the appropriate number and press OK to complete.
Viewing the User Message
Operate in the same way as that described in ”Viewing the User Message ” in the above “TMO” section.
To Next Page
Loading...
