EasyManua.ls Logo

Hytera TETRA PT580H - Attaching the Belt Clip; Attaching the Audio Accessory;Programming Cable; Status Indication; LCD Icon

Hytera TETRA PT580H
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Menu Navigation
The following menu lists show the full menus of the terminal in TMO and DMO. You can select your needed menus to
be displayed via your dealer. To select and conrm the options in the menu, operate as follows: in the home screen,
you can press the
Func/OK key to enter the Func menu, or press the Options/Back key to enter the Options
menu; then press the
Up/Down key on the Navigation key to select the needed menu, nally press the Func/OK key
to conrm. In sections introducing operations, a menu path is provided for your convenience, e.g. Message -> Create
Msg.
TMO Menu
DMO Menu
Basic Operations
Turning On/Off
To turn on the terminal, rotate the Power On-Off/Volume
Control knob clockwise. Then the LED indicator ashes
green, and the terminal shows the power-up screen
and sounds power-up alert. Upon successful powering
on, the terminal enters the home screen. In TMO, after
being turned on, the terminal will logon to the network.
In DMO, the terminal will be ready for use after being
turned on.
To turn off the terminal, rotate the
Power On-Off/Volume
Control knob counter-clockwise until a click is heard.
Switching Operation Mode
This terminal can operate in either TMO or DMO. To
switch the operation mode, press the Options/Back key
in the home screen to enter the Options menu, and
then select TMO or DMO.
Adjusting the Call Volume
Rotate the Power On-Off/Volume Control knob clockwise
to increase the call volume, or counter-clockwise to
decrease the volume. After the adjustment, the terminal
will save the settings and return to the former screen
automatically.
Inputting through Keypad
You can use the numeric keypad to enter user alias
and number, edit messages, etc. The terminal supports
these input methods: English and Number. To switch
the input method, press the
key on the numeric
keypad. In either input method, you can enter special
characters and common punctuations by pressing
,
enter * by pressing
and enter a space by long
pressing this key
. As for other language input
methods (depending on your customization), operate
accordingly.

Other manuals for Hytera TETRA PT580H

Related product manuals