Hytera VM550 - Pre- and Post-event Recording; Recording Audios; Taking Photos; Recording Tagging

the recording is deactivated.
You can program the pre- and post-event recording features through the RVM Manager.
Pre-event Recording
In power-on mode, press and hold the
Video Recording
key to enter pre-event recording; press and hold
the key again to exit.
In pre-ev
ent recording mode, the product loops to record video every 10 or 20 seconds according to the
pre-recording time.
Post-event Recording
During video recording, press the
Video Recording
key to enter post-event recording.
In post-event recording mode, the product records video for another 10, 20 or 30 seconds according to
the post-recording time.
To exit post-recording mode, do one of the followings:

Press the
Video Recording
key to start normal video recording again; press the
Video Recording
key
a
gain to exit recording
.

P
ress the
Emergency
key or the
P1
key to start recording videos and tag the videos as critical
evidence; press the
Video Recording
key to exit recording.

The product automatically exits recording after the post-recording time ends
.
4.6 Recording Audios
In power-on mode, press the
P2
key (default) to record audio; press the key again to exit audio recording
.
You can modify the method to start and exit audio recording through the RVM Manager
.
4.7 Taking Photos
In power-on mode, press the
Photo Taking
key to take photo.
4.8 Recording Tagging

During video or audio recording, press the
P1
key (default) to tag critical events; press the
P1
ke
y
(def
ault) again to untag
.