Hytorc LION-.25 User Manual

This manual applies to all tool part numbers in the LION Product Families. The complete
part number matrix which applies to this manual can be found in Appendix A and
B respecvely. It is recommended the manual is kept up-to-date by checking the
edion and date code at the boom of this page by ulizing the HYTORC website and
downloading a copy of the most recent edion as needed.
HYTORC Corporate Headquarters
333 Route 17 North
Mahwah, NJ 07430, USA
Noce: The informaon contained in this document is subject to change without noce. HYTORC
makes no warranty of any kind with regard to this material, including but not limited to, the implied
warranes of merchantability and tness for a parcular purpose. HYTORC shall not be liable for
errors contained herein or for incidental or consequenal damages in connecon with the furnishing,
performance, or use of this material. It is further recommended that the end-user or repair technician
insure they have obtained and are familiar with the latest revision of the manual for the equipment
outlined in this document.
Restricted Rights Legend: Use and duplicaon of the informaon contained within this manual is
limited to the purchaser, end user, or licensed HYTORC representave. It is recommended that proper
training for the equipment outlined in this manual be conducted by a HYTORC authorized training
representave for any person who is operang or repairing the equipment outlined in this document.
Modicaon, or disclosure by any other agency or representave is strictly forbidden.
Product Modicaons: HYTORC Corporaon DOES NOT ALLOW any of the products listed in this
manual to be modied by any end user without excepon. Should an applicaon require a modicaon
to the tool, or any of the standard accessories please consult with your local HYTORC representave and
they will be able to obtain the assistance for any modicaon that may be required.
© Copyright HYTORC Corporaon 2017: All Rights Reserved. Reproducon, adaptaon, or translaon
without prior wrien permission is prohibited, except as allowed under the copyright laws.
1st. Edion. Printed in USA. January 2017
Complies with standards publicaon BS EN 82079-1:2012
LION GUN PRODUCT FAMILY:
LION-.25, LION-.7
EN, EN-ISO, ISO Standards:
For a complete EC declaraon of conformity
or if you require any further assistance please
contact your local HYTORC representave or
1-800-FOR-HYTORC (1-800-367-4986) or on
the web at www.hytorc.com.
EN 982:2009
EN 61310-2:2008
EN 61310-3:2008
ISO 3744:2011
EN ISO 12100-1:2011
EN ISO 12100-2:2011
EN ISO 14121-1:2007
EN ISO 11148-6:2012

Hytorc LION-.25 Specifications

General

Brand	Hytorc
Model	LION-.25
Category	Power Tool
Language	English