Need help?Do you have a question about the Hytorc LITHIUM II Series and is the answer not in the manual?
General| Series | LITHIUM II |
|---|---|
| Battery Type | Lithium-Ion |
| Speed | Varies by model |
| Weight | Varies by model |
| Accuracy | +/- 3% |
| Drive Size | Varies by model |
| IP Rating | IP54 (varies by model) |
Covers safety for the work environment, electrical precautions, and personal conduct.
Guidelines for tool/battery care, and professional service information.
Proper tool care, storage, and critical safety for battery packs.
Precautions for charger use and technical data on tool emissions.
Overview of complimentary support and training offered by HYTORC.
Details on warranty, labor, and calibration for tool repairs.
Information on tool rental policies, discounts, and training.
Contact information for assistance and customer support.
Detailed description of the LITHIUM SERIES II tool's features and advanced technology.
Step-by-step instructions for charging the tool's battery pack.
Explanation of the LED indicators on the charger and battery.
Recommended environmental conditions for storing batteries and chargers.
Procedure for checking the battery's remaining charge level.
Instructions on how to attach and detach the battery pack from the tool.
Information on responsible disposal and recycling of Lithium-ion batteries.
Guidelines for inspecting tool components and recommended calibration frequency.
Advice on operating the tool in different environmental conditions.
Methods and recommendations for safely securing the tool during use.
Step-by-step guide on attaching the auxiliary side handle to the tool.
Explanation of the work light's function for visibility and productivity.
Instructions for powering the tool on, off, and understanding auto-off features.
Details on the tool's automatic power-off feature to conserve battery.
How to adjust the torque value upwards using the control panel.
How to adjust the torque value downwards using the control panel.
Procedure for changing the displayed units for torque measurement.
Instructions for switching between clockwise (tighten) and counter-clockwise (loosen) modes.
How to use the loosen mode and adjust its torque value.
Explanation of switching between torque and rundown speeds.
Using the rundown speed for fast nut running and loosening.
Steps for attaching the reaction arm to the tool for secure operation.
Procedure for correctly fitting the socket onto the tool's square drive.
Preparing the tool for conventional bolting operations.
Detailed process for tightening fasteners using the tool.
Procedure for loosening fasteners using the tool's reverse mode.
Steps for attaching the specific driver for HYTORC Washers.
Process for tightening bolts using the HYTORC Washer Driver.
Procedure for loosening fasteners with the HYTORC Washer Driver.
Steps for attaching the specific driver for HYTORC Nuts.
Process for tightening fasteners using the HYTORC Nut Driver.
Procedure for loosening fasteners using the HYTORC Nut Driver.
To Next Page
