Hytorc LITHIUM II Series - Loosening the HYTORC Nut

25
LOOSENING THE HYTORC NUT
• The tool provides the maximum torque capacity in reverse providing a powerul breakout capability
• Press the directional switch to toggle to the loosen mode
• When loosening a HYTORC Nut, position the driver and hold the trigger until the HYTORC Nut is loose
• The status light turn amber during operation. I the operation is successul, the status light will turn green, i
unsuccessul the status light will turn red.
• Remove the tool driver rom the nut
(CO NT ’ D .)