LITHIUM SERIES® II ELECTRIC TORQUE TOOL
QUICK START GUIDE
. REVIEW SAFETY INSTRUCTIONS . INSPECT TOOL COMPONENTS CLOCKWISE FROM LEFT
. CHARGE, TEST, AND INSTALL BATTERY
. POWERON TOOL . REVIEW CONTROL PANEL AND HOME SCREEN
Do not get wet.
Avoid exposure to condensing humidity.
Do not operate in temperatures above
140° F (60° C).
Keep vents clear of dust, dirt and debris.
Do not use in explosive environments.
Secure tool to prevent from dropping.
Keep hands clear of reaction pinch points.
Use handle supplied with tool.
Use only the battery and charger provided.
Follow Lithium-Ion Battery Safety
Instructions:
https://library.hytorc.com/posts/3103
. Square Drive
. Reaction Spline
. Planetary Gearbox
. Handle Attachment
. Directional Control
. Cooling Vents
. Control Panel
. USB Micro Port
. Pistol Grip
. Eyelet
. Trigger
. Dual Speed Switch
. Battery
Power-On
Push any button to
power-on the tool.
Power-Off
Push and hold the
center button to
power-off the tool.
Charge indicator flashes while charging,
turns solid green when fully complete
(approximately 90 minutes).
Slide battery onto
tool base until the
release button
snaps tight.
Press test button: a
fully charged battery
should display 4
green lights.
IMPORTANT!
1 2 3 4
7
1 2
5 6 7
13
12
11
8
10
9
. Angle
. Release
. Status Indicator
. Fastener
. Direction
. Menu - Level
. Right Scroll Button
. Center Select Button
. Left Scroll Button
. Bluetooth
. Torque
8
3
4
7
6
5
10
9
11
10
9
8
Connect charger to power supply and
insert battery.
1 2
5
3
4
6
. Battery
. Charging Cable
. Power Outlet
. Power Cord
. Power Supply
. Charger
. Charge Indicator
. Tool Base
. Test Button
. Release Button
HYTORC.COM1-800-FOR-HYTORC
To Next Page
Need help?
General
