EasyManua.ls Logo

Hyundai 70D-9 - User Manual

Hyundai 70D-9
229 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CONTENTS
CONTENTS
FOREWORD
FOREWORD
A message to hyundai lift truck operators
-----------------------------------------------------------------------
0-1
Introduction
------------------------------------------------------------------------------------------------------------------------
0-2
How to use this manual
-----------------------------------------------------------------------------------------------------
0-3
EC regulation approved
----------------------------------------------------------------------------------------------------
0-5
Safety labels
-----------------------------------------------------------------------------------------------------------------------
0-6
Guide (Direction, Serial number, Symbols)
---------------------------------------------------------------------
0-13
1. SAFETY HINTS
1. SAFETY HINTS
1. Daily inspection
--------------------------------------------------------------------------------------------------------------
1-1
2. Do's and don'ts
--------------------------------------------------------------------------------------------------------------
1-2
3. Seat belts
-----------------------------------------------------------------------------------------------------------------------
1-4
4. No riders
-------------------------------------------------------------------------------------------------------------------------
1-5
5. Pedestrians
--------------------------------------------------------------------------------------------------------------------
1-6
6. Operator protection
-------------------------------------------------------------------------------------------------------
1-7
7. Fork safety
------------------------------------------------------------------------------------------------------------------
1-8
8. Pinch points
----------------------------------------------------------------------------------------------------------------
1-9
9. Travel
------------------------------------------------------------------------------------------------------------------------------
1-10
10. Grades, ramps, slopes and inclines
----------------------------------------------------------------------------
1-11
11. Tip over
--------------------------------------------------------------------------------------------------------------------------
1-12
12. Surface and capacity
----------------------------------------------------------------------------------------------------
1-14
13. Parking
---------------------------------------------------------------------------------------------------------------------------
1-15
14. Refueling
------------------------------------------------------------------------------------------------------------------------
1-16
15. Step
--------------------------------------------------------------------------------------------------------------------------------
1-17
16. Operator's safety rules
--------------------------------------------------------------------------------------------------
1-18
17. Side shift
------------------------------------------------------------------------------------------------------------------------
1-19
2. OPERATING HAZARDS
2. OPERATING HAZARDS
1. Loose loads
--------------------------------------------------------------------------------------------------------------------
2-1
2. Long and wide loads
-----------------------------------------------------------------------------------------------------
2-2
3. Rear swing
---------------------------------------------------------------------------------------------------------------------
2-2
4. Low overhead clearance
-----------------------------------------------------------------------------------------------
2-3
5. Fast turns and high loads
----------------------------------------------------------------------------------------------
2-3
6. Right angle stacking
------------------------------------------------------------------------------------------------------
2-4
7. Chain slack
---------------------------------------------------------------------------------------------------------------------
2-4
8. Pallets and skids
------------------------------------------------------------------------------------------------------------
2-5
9. Caution for electrical lines
---------------------------------------------------------------------------------------------
2-5

Table of Contents

Questions and Answers

  • D
    David StoneSep 17, 2025
    What causes insufficient or variable oil flow in Hyundai Forklifts?
    • A
      andrehenrySep 18, 2025
      If you're experiencing insufficient or variable oil flow in your Hyundai Forklifts, it could be due to a clogged flow control valve orifice. Clean the orifice to resolve this issue.
  • H
    Heather StanleyAug 25, 2025
    How to fix oil pressure warning lamp that won't turn off in Hyundai Forklifts?
    • J
      jessegilbertAug 25, 2025
      If the oil pressure warning lamp in your Hyundai Forklifts stays on, it could be due to several reasons. First, check the oil level in the oil pan and add oil if it's low. Another possible cause is a clogged oil filter element, which would require replacement. Also, inspect the oil pipe joints for any looseness or wear that may be causing leaks, and repair as necessary.
  • J
    Joseph BeckAug 25, 2025
    Why does the radiator pressure valve spout steam in my Hyundai 70D-9?
    • S
      Spencer WrightAug 26, 2025
      If the radiator pressure valve in your Hyundai Forklifts is spouting steam, it could be due to a lack of cooling water or water leakage, in which case you should add water or repair the leak. Another possible cause is a loose fan belt, so adjust the belt accordingly. Additionally, dust and scale accumulation in the cooling system can cause this issue, so change the water and clean the interior of the cooling system.
  • M
    Matthew WashingtonAug 27, 2025
    What to do if the water temperature gauge on my Hyundai Forklifts indicates red range on the right?
    • J
      johnathan14Aug 27, 2025
      If the water temperature gauge on your Hyundai Forklifts is in the red range on the right, it could be due to a clogged or damaged radiator fin, which would need to be cleaned or repaired. Another possibility is a faulty thermostat or water temperature gauge, requiring replacement. Also, check if the radiator filler cap is loosening; retighten it or replace the packing.
  • N
    Nancy RuizAug 27, 2025
    Why is my Hyundai 70D-9 Forklifts engine emitting whitish or bluish smoke?
    • P
      Pamela MitchellAug 27, 2025
      If your Hyundai Forklifts engine is emitting whitish or bluish smoke, it could be due to an excessive quantity of oil in the oil pan, in which case you should reduce the oil quantity. Another possible cause is poor quality fuel, so replace it with the specified fuel.
  • J
    Jennifer SmithSep 13, 2025
    Why does the alternator make abnormal sounds in my Hyundai 70D-9 Forklifts?
    • D
      Donna BishopSep 13, 2025
      If the alternator in your Hyundai Forklifts is making abnormal sounds, it's likely that the alternator is defective and needs to be replaced.
  • E
    Elizabeth RobertsonSep 12, 2025
    What causes abnormal sounds in the valve or valve unit of Hyundai Forklifts?
    • B
      Barbara HarrisSep 12, 2025
      If the valve or valve unit in your Hyundai Forklifts is making abnormal sounds, it could be due to several reasons. One possibility is that the oil inlet pipe of the oil pump is sucking air, requiring repair or replacement. Another cause could be a faulty valve with unbalanced oil pressure, or a dented or clogged pipe, in which case you should adjust the valve set pressure and check the specified oil pressure. Insufficient air bleeding can also lead to these sounds, so bleed the air completely.
  • J
    Justin DiazSep 12, 2025
    Why doesn't the heater signal turn red on my Hyundai 70D-9 Forklifts?
    • J
      James HawkinsSep 12, 2025
      If the heater signal on your Hyundai Forklifts doesn't turn red, it could be due to faulty wiring, so check and repair any wiring issues. Another possible cause is a damaged glow plug, which would need to be replaced.
  • R
    Ryan GraySep 4, 2025
    Why does the charge lamp light during normal engine operation in Hyundai 70D-9?
    • R
      Ralph GonzalezSep 4, 2025
      If the charge lamp lights up during normal engine operation in your Hyundai Forklifts, it could be due to a defective charge lamp, which would need to be replaced. Another possible cause is faulty wiring, so check and repair any wiring issues.
  • J
    Jeffrey WilliamsSep 2, 2025
    Why does the starting motor stop before the engine starts on my Hyundai 70D-9 Forklifts?
    • K
      Kayla GentrySep 2, 2025
      If the starting motor in your Hyundai Forklifts stops before the engine starts, this could be due to faulty wiring, so check and repair any wiring issues. Another possible cause is insufficient battery voltage, so try recharging the battery.

Hyundai 70D-9 Specifications

General IconGeneral
Transmission TypeAutomatic
Tire TypePneumatic
Fuel TypeDiesel
Rated Load Capacity7000 kg
Lifting Height3, 000 mm

Related product manuals