EasyManua.ls Logo

Hyundai BC3 - Page 342

Hyundai BC3
651 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
07
7-3
System settings
Setting functions for the system
OTM070090L
OTM070090L
Forward safety
With the engine on, select or deselect
‘Driver assistance J Forward safety’
from the Settings menu to set whether
or not to use each function.
- If ‘Active assist’ is selected, the system
will warn the driver with a warning
message and an audible warning
depending on the collision risk
levels. Braking assist will be applied
depending on the collision risk.
- If ‘Waring only’ is selected, the system
will warn the driver with a warning
message and an audible warning
depending on the collision risk levels.
Braking will not be assisted.
- If ‘Off’ is selected, the system will
turn off. The
warning light will
illuminate on the cluster.
The driver can monitor Forward
Collision-Avoidance Assist ON/OFF
status from the Settings menu. If the
warning light remains ON when
the system is ON, we recommend that
you have the system inspected by an
HYUNDAI dealer.
WARNING
When the engine is restarted, Forward
Collision-Avoidance Assist will always
turn on. However, if ‘Off’ is selected
after the engine is restarted, the
driver should always be aware of the
surroundings and drive safely.
CAUTION
If ‘Waring only’ is selected, braking is
not assisted.
Information
Forward Collision-Avoidance Assist
will turn off when ESC is turned off by
pressing and holding the ESC OFF button
for more than 3 seconds. The
warning
light will illuminate on the cluster.

Table of Contents