1
FEATURES OF YOUR HYUNDAI
89
1
FEATURES OF YOUR HYUNDAI
89
To remove frost or exterior fog on the
windshield:
o Set the air flow control to the defrost
( ) position. (The A/C will turn on
automatically and "Fresh" mode will
be activated.)
o Set the temperature control to warm.
o Set the fan speed control to position
"3" or "4".
NOTE:
When the A/C is operated continu-
ously on the floor-defrost level ( )
or defrost level ( ), it may cause fog
to form on the exterior windshield. If
this occurs, set the air flow control to
the face level position ( )and fan
speed control to the low position.
B730A01L-GAT
Operation Tips
o To keep dust or unpleasant fumes
from entering the car through the
ventilation system, temporarily set
the air intake control at "Recircula-
tion". Be sure to return the control to
"Fresh" when the irritation has
passed to keep fresh air in the ve-
hicle. This will help keep the driver
alert and comfortable.
o Air for the heating/cooling system is
drawn in through the grilles just ahead
of the wind-shield. Care should be
taken that these are not blocked by
leaves, snow, ice or other obstruc-
tions.
o To prevent interior fog on the wind-
shield, set the air intake control to
the fresh air ( ) position, fan speed
to the desired position, turn on the air
conditioning system, and adjust tem-
perature control to desired tempera-
ture.
HFC2108
AIR CONDITIONING SYSTEM
B740A01S-AAT
Air Conditioning Switch
(If installed)
The air conditioning is turned on or off
by pushing the A/C button on the heat-
ing/air conditioning control panel.
HFC2069
To Next Page