1
FEATURES OF YOUR HYUNDAI
12
MSO-0048-2
Battery
MSO-0048-1
Screwdriver
Case
B070E02HP-GAT
Replacing the battery
When the transmitter's battery becomes
weak, it may take several pushes on
the button to lock or unlock the doors,
and the LED will not light. Replace the
battery as soon as possible.
Battery type : CR2032
Replacement instructions:
1. Carefully separate the case with a
blade screwdriver as shown in the
illustration.
2. Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
is the same(+side facing down), then
insert it in the transmitter.
- Other vehicles or objects may be
blocking the signal.
- The weather is extremely cold.
- The transmitter is close to a radio
transmitter such as a radio station
or an airport which can interfere
with normal operation of the trans-
mitter.
When the transmitter does not work
correctly, open and close the door
with the ignition key. If you have a
problem with the transmitter, con-
tact an authorized Hyundai Dealer.
NOTE:
Keep the transmitter away from wa-
ter or any liquid. If the keyless entry
system is inoperative due to expo-
sure to water or liquids, it will not be
covered by your manufacturer ve-
hicle warranty.
To Next Page