6
DO-IT-YOURSELF MAINTENANCE
37
G270A02A-GAT
HEADLIGHT BULB
Replacement instructions:
1. Allow the bulb to cool. Wear eye
protection.
2. Always grasp the bulb by its plastic
base, avoid touching the glass.
3. Disconnect the power cord from
the bulb base in the back of the
headlight.
4. Remove the dust cover.
G270A01FC
!
5. Push the bulb spring for removing
the headlight bulb.
6. Remove the protective cap from
the replacement bulb and install
the new bulb by matching the plas-
tic base with the headlight hole.
Install the dust cover after retight-
ening the bulb spring and recon-
nect the power cord.
7. Use the protective cap and carton
to dispose of the old bulb.
8. Check for proper headlight aim.
G270A02FC
WARNING:
The halogen bulb contains gas
under pressure and if impacted
could shatter, resulting in flying
fragments. Always wear eye pro-
tection when servicing the bulb.
Protect the bulb against abrasions
or scratches and against liquids
when lighted. Turn on the bulb
only when installed in a headlight.
Replace the headlight if damaged
or cracked. Keep the bulb out of
the reach of children and dispose
of the used bulb with care.
To Next Page
Loading...
Need help?
General
