1
FEATURES OF YOUR HYUNDAI
27
!
B220A01FC-GAT
SEAT BELTS - Center Rear Seat
3-Point System With Emergency
Locking Retractor (If installed)
1. Before fastening the rear seat center
belt, confirm the metal tab (a) and
buckle (b) are latched together.
2. After confirming that (a) and (b) are
latched, pull the seat belt out of the
retractor and insert the metal tab (c)
into the buckle (d).
There will be an audible "click" when the
tab locks in the buckle. The seat belt
automatically adjusts to the proper length
only after the lap belt is adjusted manu-
ally so that it fits snugly around your
hips. If you lean forward in a slow, easy
motion, the belt will extend and let you
move around. If there is a sudden stop
or impact, the belt will lock into position.
It will also lock if you try to lean forward
too quickly.
WARNING:
o When using the rear seat center
belt, you must lock all metal tabs
and buckles. If any metal tab or
buckle is not locked, it will in-
crease the chance of injury in the
event of collision.
o Never unlock the metal tab (a)
and the buckle (b) with the fol-
lowing exceptions.
(1)In case of folding rear
seatbacks down.
(2)If transporting an object on
the rear seat may cause dam-
age to the rear seat center
belt.
o Lock the metal tab (a) and the
buckle (b) immediately after fold-
ing rear seatbacks up.
B220A01FC
B220A02Y-D
To Next Page
Loading...
