1
FEATURES OF YOUR HYUNDAI
31
B230B01FC
B230B02A-GAT
Using a Child Restraint System
with "Tether Anchorage"System
For small children and babies, the use
of a child seat or infant seat is strongly
recommended. This child seat or in-
fant seat should be of appropriate size
for the child and should be installed in
accordance with the manufacturer's
instructions. It is further recommended
that the seat be placed in the vehicle's
rear seat since this can make an im-
portant contribution to safety. Your
vehicle is provided three child restraint
hook holders for installing the child
seat or infant seat.
B230E02FC-GAT
Securing a Child Restraint Sys-
tem with "Tether Anchorage"
System
Three child restraint hook holders are
located on the vertical back panel (be-
hind rear bumper bar).
1. Route the child restraint seat strap
over the seatback.
For vehicles with adjustable head-
rest, route the tether strap under the
headrest and between the headrest
posts, otherwise route the tether
strap over the top of the seatback.
Cover, Child Restraint
Hook Holder
Bolt, Holder (5/16"-30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Spacer (10 mm), Child
Restraint Hook Holder
Retainer Washer
B230E01FC
Front of Vehicle
Back panel
Covering shelf
Attaching clip
2. Connect the tether strap hook to the
child restraint hook holder and
tighten to secure the seat.
To Next Page