1
FEATURES OF YOUR HYUNDAI
35
too quickly, the seat belt retractor will
lock into position. In certain frontal
collisions, the pre-tensioner will acti-
vate and pull the seat belt into tighter
contact against the occupant's body.
The seat belt pre-tensioner system
HXG229
B180B01A-GAT
Pre-tensioner Seat Belt
(If Installed)
Your Hyundai vehicle is equipped with
driver's and front passenger's pre-
tensioner seat belts. The purpose of
the pre-tensioner is to make sure that
the seat belts fit tightly against the
occupant's body in certain frontal col-
lisions.
The pre-tensioner seat belts can be
activated with the airbags.
The pre-tensioner seat belt operates in
a similar same way as an Emergency
Locking Retractor (ELR) type of seat
belt. When the vehicle stops suddenly,
or if the occupant tries to lean forward
B180B01O
Driver's airbag
1
2
3
Passenger's
airbag
consists mainly of the following compo-
nents.
Their locations are shown in the illus-
tration.
1. SRS airbag warning light
2. Seat belt pre-tensioner assembly
3. SRS control module
WARNING:
!
To obtain maximum benefit from
a pre-tensioner seat belt:
1. The seat belt must be worn cor-
rectly.
2. The seat belt must be adjusted to
the correct position.
NOTE:
To Next Page
Loading...
