Hyundai Matrix - Page 99

1
FEATURES OF YOUR HYUNDAI
87
1
FEATURES OF YOUR HYUNDAI
87
HEATING CONTROLS
B690A02S-AAT
B670C03FC-GAT
Air Intake Control
With the "Fresh" mode selected, air
enters the vehicle from the outside and
is heated or cooled according to the
function selected.
With the "Recirculation" mode selected,
air from within the passenger compart-
ment will be drawn through the heating
system and heated or cooled according
to the function selected.
NOTE:
It should be noted that prolonged
operation of the heating in "Recircu-
lation" mode will increase to fog-
ging of the windshield and side win-
dows and the air within the passen-
ger compartment will become stale.
In addition, prolonged use of the air
conditioning with the "Recirculation"
mode selected may result in the air
within the passenger compartment
becoming excessively dry.
This is used to select fresh outside air
or recirculating inside air.
To change the air intake control mode,
(Fresh mode, Recirculation mode) push
the control button.
FRESH MODE ( ) :
The indicator light on the button goes
off when the air intake control is in fresh
mode.
RECIRCULATION MODE ( ):
The indicator light on the button is
illuminated when the air intake control
is in recirculation mode.
HFC2067
For normal heating operation, set the air
intake control to the "Fresh" position
and the air flow control to "Floor".
For faster heating, the air intake control
should be in the "Recirculation" posi-
tion.
If the windows fog up, move the air flow
control to the "Def" (defroster) position.
(The A/C will turn on automatically and
"Fresh" mode will be activated.)
For maximum heat, rotate the tempera-
ture control to "Warm".
B690A02FC