Why is there excessive spatter in my Hyundai MMA during MMA welding?
If your Hyundai Welding System produces excessive spatter during MMA welding, it might be due to an incorrect output polarity connection. Try exchanging the polarity to resolve this issue.
What to do if the electrode holder becomes very hot on my Hyundai Welding System?
If your Hyundai Welding System's electrode holder becomes very hot, it is likely that the rated current of the electrode holder is smaller than its actual working current. Replace it with one that has a higher rated current.
What to do if my Hyundai MMA has power but no welding output?
If your Hyundai Welding System turns on, the power LED is on, and the fan works, but there is no welding output, consider the following: * Check for any loose connections inside the machine. * Inspect the output terminal joint for open circuits or loose contacts. * If the overheating LED is illuminated, the machine may be in an over-heating protection state. Allow the welding machine to cool down to see if it recovers automatically. * Check the thermal switch and replace it if it is damaged.
Why is the output current unstable on my Hyundai Welding System?
If your Hyundai Welding System turns on, the fan works, but the output current is unstable and cannot be controlled by the potentiometer, here are a few things to check: 1. The current potentiometer might be faulty and need replacement. 2. Inspect the inside of the machine for loose contacts and reconnect them if found.
How to fix a Hyundai Welding System that won't turn on?
If your Hyundai Welding System doesn't turn on, the power LED is off, the fan isn’t working, and there is no welding output, check if the power switch is closed and ensure that there is input power.
General| Brand | Hyundai |
|---|---|
| Model | MMA series |
| Category | Welding System |
| Language | English |
Explains the benefits of advanced DC inverter technology for the welder.
Details the advanced control technology and its welding performance benefits.
Highlights key features like efficiency, portability, and stable arc for field work.
Presents a detailed table of technical specifications for different MMA models.
Illustrates the output voltage and current characteristics of the welding machine.
Describes controls and indicators located on the front panel of the welder.
Identifies and explains components found on the back panel of the welder.
Step-by-step guide for correctly installing the welding machine.
Instructions on how to operate the welding machine after installation.
Advises on suitable environmental conditions for safe and effective welding.
Provides critical safety tips and warnings for machine operation and longevity.
Provides guidance on the responsible disposal of the product at its end-of-life.
Lists common issues and their corresponding causes and solutions for the welder.
To Next Page
