What to do if all functions are not operational on Hyundai Robex 22-7 Excavators?
If all functions of your Hyundai Excavators are not operational, the first step is to fill up with hydraulic oil. If the issue persists, it's possible that the pumps or couplings are faulty, requiring disassembly and inspection. In such cases, you may need to replace the pump assembly or couplings.
Why is the operation power weak on my Hyundai Excavators?
If your Hyundai Excavators are showing weak operational power, several factors could be at play. Start by checking the hydraulic oil level and replenishing it if necessary. Also, inspect the suction filter for any blockages and clean it. Other potential causes include a faulty intake system, which would require repairing the affected piping, or the presence of bubbles in the hydraulic oil, necessitating identification and removal of the bubble source. Low pump flow requires replacement of the pump assembly. If the hydraulic oil is deteriorated, replace it. Also ensure that the pressure is correct, and the relief valve is working correctly by cleaning, disassembling, adjusting or replacing it. Finally, a large internal leak on the control valve requires replacement of the assembly.
Identifies major external and internal parts of the machine with labels.
Illustrates the internal components and assembly of the main hydraulic pump.
Details the procedure for removing and installing the main hydraulic pump.
Explains how to perform performance tests on the hydraulic pump.
Explains procedures for replacing and cleaning hydraulic oil filters.
Details specifications, port sizes, and relief pressures for the control valve.
Lists components for control valve disassembly and assembly.
Covers handling, installation, and operation precautions for control valves.
Outlines methods to inspect and adjust slew motor performance.
Lists common failures and remedies for the starter system.
Lists common failures and remedies for the alternator system.
Provides troubleshooting steps for general operational issues.
Troubleshooting for lack of operation in boom, arm, bucket, and slewing.
Troubleshooting for incorrect operation of the crawler system.
Troubleshooting for slow speed, meander, and incline holding issues.
Troubleshooting for lack of slewing operation or resistance.
Troubleshooting for no movement or slow action in the boom cylinder.
Troubleshooting for the natural fall of the boom.
Troubleshooting for swing system issues like no movement or drifting.
General| Brand | Hyundai |
|---|---|
| Model | Robex 22-7 |
| Category | Excavators |
| Language | English |
To Next Page