To Next PageTo Next PageWhat to do if the Hyundai Car Navigation system does not turn on?
If the Hyundai Car Navigation system's power won't turn on, first, check the fuse. If it's disconnected, replace it with a suitable one. If the fuse disconnects again, it could indicate a more serious problem. Also, ensure the device is properly connected; a loose connection can prevent the system from powering on.
Why does the sound not work on my Hyundai Car Navigation system?
If the sound on your Hyundai Car Navigation system isn't working, start by adjusting the volume level to ensure it's not set too low. Then, check all connections to make sure the device is properly connected. Also, sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode.
Why does my USB not work in my Hyundai Car Navigation system?
If the USB is not working on your Hyundai Car Navigation system, ensure the USB memory is formatted to FAT 12/16/32. Remove any foreign substances from the USB memory and multimedia terminal. Avoid using a separately purchased USB HUB or a USB extension cable; connect the USB memory directly to the multimedia terminal. Use a standard USB Memory (Metal Cover Type USB Memory). Note that HDD type, CF, and SD Memory are not supported. Ensure that the USB contains supported music files (MP3, WMA).
How to improve the image quality on my Hyundai Car Navigation system?
If the image color or tone quality is low on your Hyundai Car Navigation system, adjust the brightness, saturation, and contrast levels through the Display Setup menu to improve the picture quality.
Why is the sound or image quality low on my Hyundai Car Navigation system?
If the sound or image quality of your Hyundai Car Navigation system is low, it may be due to vibrations affecting the conversion switch installation. The sound may be short-circuited, and the image distorted if the device vibrates. The device will return to normal once vibrations stop.
What to do if my iPod is not recognized by my Hyundai Car Navigation system?
If your iPod is not being recognized by the Hyundai Car Navigation system, first, ensure that the iPod contains playable MP3 files by using iTunes to download and save them. Next, update the iPod's firmware version using iTunes and then reconnect it to the device. If issues persist, reset the iPod and reconnect.
General| Brand | Hyundai |
|---|---|
| Model | Santa Fe 2016 |
| Category | Automobile |
| Language | English |
General safety advice, symbol explanations, and operational cautions for safe driving.
Warnings regarding phone use, system operation, modifications, and legal compliance while driving.
Guidelines for USB device connection, supported formats, potential issues, and compatibility.
Information on MP3 and image files, iPod device usage, precautions, and supported models.
Cautions for SD card handling, insertion/ejection procedures, and usage guidelines.
Detailed explanation of head unit buttons, features, reset hole, and SD card slot.
Explanation of buttons and functions on the steering wheel remote control.
Procedures for initial system startup, turning the system on, and turning it off.
Instructions on adjusting system volume and navigating using the touchscreen interface.
How to listen to FM/AM radio, tune stations, use presets, and view station lists.
Accessing station lists and utilizing the autostore function for AM radio.
Manual process for saving preferred radio stations as presets for quick access.
Steps to delete saved FM/AM radio presets.
Configuring radio options like scan, traffic announcements (TA), and regional settings.
How to listen to DAB radio, tune stations, use presets, and view station lists.
Procedures for saving, deleting DAB presets, and organizing the station list.
Configuring DAB scan functionality and other operational settings.
Features for traffic announcements (TA), seamless switching, and L-Band reception in DAB.
Adjusting audio settings specific to DAB radio operation.
How to play music files from a USB device, including navigation and search functions.
Utilizing playback modes like scan, repeat, and shuffle for USB music files.
Adjusting audio settings for USB media playback.
Displaying image files from USB, with controls for zooming, rotating, and navigation.
Navigating between USB image files using the skip function.
Accessing image lists, viewing file details, and configuring display settings for USB images.
Setting the interval for automatic playback of USB images in a slideshow.
How to play music from an iPod, including playback controls and file browsing.
Adjusting playback speed for audiobooks purchased from iTunes or Audible.
Utilizing playback modes like repeat and shuffle for iPod music files.
Adjusting audio settings for iPod media playback.
Connecting and playing audio from an auxiliary device via the AUX terminal.
Adjusting audio settings for auxiliary device playback.
Instructions for playing music wirelessly via Bluetooth from a connected mobile phone.
Important safety advice for navigation use and an explanation of the Global Navigation Satellite System (GNSS).
Guidance on acquiring satellite signals and navigating the initial caution screen.
Overview of the navigation screen layout, its various elements, and their functions.
Details on vehicle position indication, map zoom functionality, and scrolling the map interface.
Adjusting navigation volume and accessing general map menu functions.
Navigating the main menu and initiating destination searches.
Step-by-step guide to finding a destination by entering its address details.
How to select a previously searched location as a new destination.
Locating nearby Hyundai dealers using the navigation system.
Using various methods to search for Points of Interest (POI) like along route or nearby.
Detailed methods for finding POIs using city, name, or phone number information.
Creating multi-stop routes by adding multiple destinations or tour points.
Managing saved tours by reordering stops, deleting them, or changing their names.
Locating previously saved tours and saving new tour configurations.
Procedures for deleting destinations, stopping, and resuming route guidance.
Registering and managing Home/Office locations and saving/loading favourite places to USB.
Importing custom Points of Interest data from a USB device into the system.
Selecting and navigating to saved custom Points of Interest from the My POI menu.
Procedures for deleting POI data files and changing their names.
Locating parking facilities using the navigation system's search function.
Entering specific latitude and longitude coordinates to set a destination.
Locating previously recorded waypoints and manually or automatically recording new ones.
Steps to delete recorded tours or change their names.
Using previously entered start points as new destinations.
Finding destinations by interacting directly with the map interface.
Modifying route preferences such as fastest, shortest, or eco-friendly routes.
Redefining the current route by setting a detour distance.
Modifying, saving, and sorting the current navigation route.
Recalculating routes to avoid specific streets due to traffic or other conditions.
Reviewing route details and controlling navigation guidance (stop/resume).
Accessing real-time traffic information along the route or in nearby areas.
Adjusting navigation system settings like map view and POI display.
Introduction to Bluetooth Handsfree, its technology, and essential safety precautions for use.
Step-by-step guide for pairing and connecting Bluetooth-enabled mobile phones to the system.
Accessing Bluetooth help, disconnecting, and deleting paired Bluetooth devices.
Instructions for making phone calls using the Bluetooth system by entering a number.
Managing incoming and outgoing calls, including redialing and answering/rejecting calls.
Switching calls between the car system and mobile phone, and using in-call menu options.
Accessing call history and phone contacts for making calls.
Updating phone contacts, searching for contacts, and managing favorite contacts for quick dialing.
Adding, deleting, and renaming favorite contacts for easier access.
Configuring various Bluetooth system settings, including paired devices and ringtones.
Overview of the main categories available within the system settings menu.
Adjusting map display options, including junction view and POI icon visibility.
Managing user data, traffic events, and enabling navigation simulation.
Adjusting audio output, volume levels, and sound effects for the system.
Adjusting screen brightness and configuring dimming modes for optimal viewing.
Viewing and managing devices previously paired with the Bluetooth system.
Customizing ringtones and changing the Bluetooth connection passkey.
Setting the system language and configuring keyboard layouts for input.
Adjusting clock display, GPS time, date/time manually, and selecting distance units.
Restoring all system settings to their original factory defaults.
Information about the rear camera feature and its function for driver assistance.
Steps to activate the rear camera system when the vehicle is in reverse.
Explanation of the AVM system, its cameras, and how it provides a comprehensive vehicle view.
How to activate and view the front and rear camera displays of the AVM system.
Configuring AVM system settings like guidelines, alerts, and default camera views.
Understanding various indicators on the AVM screen, such as door status and mirror folding.
Explains common scenarios where the displayed car position or route guidance may differ from reality.
Solutions for issues related to the device not turning on or failing to play system content.
Resolving problems with image color/tone quality and sound output issues.
Solutions for common problems encountered when using USB devices with the system.
Steps to resolve issues when the iPod is connected but not recognized by the system.
Information regarding registered trademarks for Bluetooth and iPod technologies.
Details on open source software licenses used in the product and how to obtain source code.
Technical specifications for common system parameters and Bluetooth module.
Technical details for the radio tuner and the TFT-LCD display unit.
