10
5
Basic Operations:
Taking pictures:
(1) Turn the power on.
(2) Set the resolution mode you need and/or the NORMAL/
MACRO switch position.
(3) Frame the subject in the viewfinder.
(4) Press the shutter release button halfway for focusing,
until the green (shooting-ready) LED stops blinking,
which indicates the camera is ready to take the picture.
(5) Press the shutter release button all the way down and
you should see " BUSY " on the LCD. The image is
being saved.
(6) When "BUSY" disappears, the image has been saved.
Please keep the lens clean to ensure better image quality.
Please use a lintless cloth to clean gently in one direction
the surface of lens when cleaning.
Deleting pictures:
(1) Deleting last picture: Press the DEL button once and
press the shutter release button.
(2) Delete all pictures: Press DEL button twice till
"ERASE ALL" is displayed on the LCD. Then press
the shutter release button and all of the pictures in the
memory card will be deleted.
To Next Page
Loading...