I-Semble REVISED VERTICAL MURPHY BED - Required Tools; Required Hardware

7
Tape Measure
#8 Countersink Bit
5/32" Drill Bit
REQUIRED TOOLS (NOT INCLUDED)
REQUIRED HARDWARE (NOT INCLUDED)
Stud Finder
Wood Glue
Phillips Screwdriver
3/16" Drill Bit
Circular Saw
or Table Saw
3/8" x 1
1
⁄2" Dowels
3/8" Nut Driver or
Socket Wrench
5/16" Drill Bit
Drill
#8 x 2" Screws
Pencil
13/64" Drill Bit
3/8" Drill Bit