IBASE Technology MB820 - JP4: Clear CMOS Contents; JP5: COM3 RS232 +5 V;+12 V Power Setting; JP6: COM4 RS232 +5 V;+12 V Power Setting

INSTALLATIONS
MB820 User’s Manual 9
JP4: Clear CMOS Contents
Use JP4, a 3-pin header, to clear the CMOS contents. Note that the
ATX-power connector should be disconnected from the motherboard
before clearing CMOS.
JP4 Setting Function
Pin 1-2
Short/Closed
Normal
Pin 2-3
Short/Closed
Clear CMOS
JP5: COM3 RS232 +5V/+12V Power Setting
JP5 Setting Function
Pin 1-2
Short/Closed
+12V
Pin 3-4
Short/Closed
Normal
Pin 5-6
Short/Closed
+5V
JP6: COM4 RS232 +5V/+12V Power Setting
JP6 Setting Function
Pin 1-2
Short/Closed
+12V
Pin 3-4
Short/Closed
Normal
Pin 5-6
Short/Closed
+5V