IBC Technologies SL 80-399 User Manual

INSTALLATION AND OPERATING INSTRUCTIONS
www.ibcboiler.com
SL 80-399
MODULATING GAS BOILER
(Natural Gas or Propane)
WARNING: If the information in this manual is not followed exactly, a re or
explosion may result causing property damage, personal injury, or loss of life.
Do not store or use gasoline or other ammable vapours and liquids or other
combustible materials in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a nearby phone. Follow the gas
supplier’s instructions.
• If you cannot reach your gas supplier, call the re department.
Installation and service must be performed by a qualied installer, service
agency or the gas supplier.
This Manual is also available in French - contact IBC or visit our web site www.ibcboiler.com

IBC Technologies SL 80-399 Specifications

General

Brand	IBC Technologies
Model	SL 80-399
Category	Boiler
Language	English

Summary

Installation Guide

Installation Code Compliance

Installation must conform to local and national codes.

Boiler Location Requirements

Venting and Air Intake Setup

Proper setup for exhaust venting and combustion air intake.

Condensate Removal System

Gas Piping Requirements

Electrical Connections

Boiler Systems and Operation

Boiler Control System Functions

Boiler Operating Cycles

Step-by-step process of boiler cycles during normal and error modes.

Setup and Load Configuration

Startup and Commissioning

Boiler Startup and Shutdown

Procedures for safely starting and stopping the boiler.

Pre-Startup Checks and Preparations

Essential checks and preparations before initial boiler operation.

Commissioning and Calibration

Field calibration and verification of gas valve operation.

Troubleshooting Guide

Troubleshooting Preliminary Checks

Troubleshooting Electronic Components

Comprehensive Troubleshooting

Detailed guide for diagnosing and resolving system problems.