To Next PageTo Next Page
Need help?Do you have a question about the IBC IBGFSW1-0110 and is the answer not in the manual?
Details physical dimensions for VX 110, VX 150, and VX 199 models.
Outlines required pipe sizes and types for flue, air intake, water, and gas.
Lists key advantages such as high thermal efficiency and easy-to-use touchscreen.
Details IBC's 5-year parts and 15-year heat exchanger limited warranty.
Essential safety and preparation steps before installing the boiler.
Specifies compliance with national and local installation codes (CAN/CSA, ANSI).
Procedures for safely removing an old boiler and inspecting the venting system.
Guidelines for selecting a suitable installation location with temperature/humidity limits.
Instructions on securely attaching the boiler using appropriate fasteners and wall structure.
Details on using PVC, CPVC, PPs, or SS pipe for venting and air intake.
Specifies minimum distances from combustible surfaces and for service access.
Comprehensive guide to venting options, codes, and materials.
Requirements for installing the boiler in confined spaces like closets.
Step-by-step guide for installing and filling the condensate trap.
Instructions for installing a neutralization package for condensate discharge.
Best practices for water quality, system piping, and glycol usage.
Guidelines for proper gas supply pressure and pipe sizing.
Requirements for wiring the boiler, including power supply and protection.
Overview of the touchscreen controller's capabilities, including pump control and zoning.
Details on using the touchscreen display, including status indicators and navigation.
A checklist of critical steps before the initial boiler startup.
Step-by-step instructions for starting up and shutting down the boiler.
Procedure to verify the boiler's ignition safety shutdown function.
Steps for initial setup, calibration, and fuel conversion.
Routine tasks for the homeowner to ensure proper boiler care.
Recommended maintenance tasks for qualified service technicians.
Procedures for replacing key components like the fan, gas valve, and burner.
Instructions on how to clean the viewport to check the flame.
Steps for checking, cleaning, and refilling the condensate trap.
Guides for troubleshooting sensors, SIM+, fan, and pressure sensors.
Explains common error codes, their diagnoses, and fixes.
Addresses problems like fumes, ghost calls for heat, and output issues.
Helps diagnose and resolve problems related to rapid or improper boiler cycling.
Provides controller and internal wiring diagrams for electrical connections.
Lists part numbers and quantities for various boiler components.
General
