EasyManua.ls Logo

IBC DC 23-84 User Manual

IBC DC 23-84
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION AND OPERATING INSTRUCTIONS
www.ibcboiler.com
DC Series Combi Boilers
DC 23-84, DC 29-106, DC 33-124, DC 33-160
(Natural Gas or Propane)
WARNING: If the information in this manual is not followed exactly, a re or
explosion may result causing property damage, personal injury, or loss of life.
Do not store or use gasoline or other ammable vapours and liquids or other
combustible materials in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a nearby phone. Follow the gas
suppliers instructions.
• If you cannot reach your gas supplier, call the re department.
Installation and service must be performed by a qualied installer, service
agency or the gas supplier.
This Manual is also available in French - contact IBC or visit our web site www.ibcboiler.com
Question and Answer IconNeed help?

Do you have a question about the IBC DC 23-84 and is the answer not in the manual?

IBC DC 23-84 Specifications

General IconGeneral
BrandIBC
ModelDC 23-84
CategoryBoiler
LanguageEnglish

Summary

SAFETY CONSIDERATIONS

HAZARDS & PRECAUTIONS

Details hazards and precautions related to boiler operation and safety.

INSTALLATION

CODE REQUIREMENTS

Outlines necessary codes and standards for boiler installation compliance.

EXHAUST VENTING AND AIR INTAKE

Explains requirements for vent materials, travel, and termination for safe exhaust.

GAS PIPING

Details gas supply pressure, piping requirements, and connection procedures.

STARTUP AND COMMISSIONING

LIGHTING AND SHUTTING DOWN THE BOILER

Provides safety instructions and procedures for starting and stopping the boiler.

PRIOR TO START-UP

Lists essential checks and procedures required before initial boiler operation.

COMMISSIONING

Details the process of commissioning the boiler, including fuel conversion verification.

MAINTENANCE

RELIEF VALVE - MAINTENANCE AND TESTING

Instructions for maintaining and testing the safety relief valve's function.

TROUBLESHOOTING

PRELIMINARY CHECKS

Initial diagnostic checks to perform when troubleshooting boiler issues.

WARNINGS AND FAULTS

Explains warning and fault codes displayed by the boiler controller and their solutions.

Related product manuals