17
Version 17.01, as of: 27-Jun-2017
4.3.3 "Mammut S+" roof hooks
"Mammut S+" roof hooks are used to ensure the safety of the structure under high
snow loads. This roof hook provides improved static characteristics compared with
the "Standard S+" roof hook. In certain conditions (e.g. low snow load zone), it may
be possible to install "Mammut S+" roof hooks only on every second rafter and
consequently reduce the number of roof hooks.
Stainless steel 1.4301 S460
Dimensions base plate (length / width / height)
Dimensions hook (width / height)
Hook distance from the base plate
General construction approval
Maximum ch. load / roof hook [kN]
flat head screw 6x100-A2 TX25
flat head screw 8x100-A2 TX40
flat head screw 8x140-A2 TX40
flat head screw ASD 8x240-A2 TX40
countersunk screw 8x280 TX40
flat head screw ASD 8x300-A2 TX40
countersunk screw 8x340 TX40
connection piece for roof hook profile M10
Figure 16: parameters roof hook “Mammut S+”
Figure 15: "Mammut S+" roof hook
To Next Page
Loading...
Need help?
General