29
Version 17.01, as of: 27-Jun-2017
4.5.2 Fitting "Mammut Form S+" roof hooks on bitumen roofs
Figure 40: "Mammut Form S+ Bitumen"
Specify the roof hook position so that the roof hook (1) can be attached to the rafter using screws (3).
Secure roof hooks to the roofing substructure using screws (2+3).
In accordance with the valid specialist professional code and directives governing flat roofs set out by
the association of German roofers (Deutsches Dachdecker Handwerk) the roof sealing must be
certified by a specialist.
The seal may be applied as follows:
o Separately (polymer bitumen shingles)
o Using self-adhesive components (roof sealing)
o Thermally activated (gassed roof seal)
To Next Page
Loading...